The idea is that all the Wi-Fi devices on your network connect through the access point. Infrastructure mode requires a Wi-Fi access point, usually built into a router. We will also assume that you are using the most common settings or know how to accommodate the changes that have been made.Īny Wi-Fi device, including a printer, can support one or more of three different Wi-Fi modes: infrastructure, ad hoc, and Wi-Fi Direct. If this is a network that you did not set up yourself, you should be able to contact someone who can give you the information. Key information you may need during the setup process includes the network's SSID (its name), the network password, and which security protocol your network uses (WEP, WPA, or WPA2). Similarly, if you set the access point to connect only with devices with specific MAC addresses, you have to enter the printer's MAC address in the list before you install it. For example, if you turned off DHCP, which automatically assigns IP addresses, you need to assign the printer an IP address manually. You should also know about any other settings that you may have changed from the most common choices. (Note that if your network is not DHCP, we suggest that you contact your sysadmin and/or set up a static IP address.) Printers usually find and connect (with credentials you provide) to your router, and subsequently to your computing device. Unless your network uses static IP addresses or another protocol besides DHCP, much of this process is automatic. Review Your Settings Before Getting Started Still, the steps for connecting wirelessly to a printer depend largely on what method you're using, what type of printer you have, and the router type. Often, your OS will simply walk you through the process. The good news is that much of these procedures are automated in your modern desktop and mobile operating system. Best Hosted Endpoint Protection and Security Software.Make sure that BR-Script or PS is listed for Print Using or Use. (Where is the printer model name.)įor PostScript Driver (not available for all models): Make sure that + CUPS is listed for Print Using or Use.

Choose your Brother machine from Printer Name list.Ĭonfirm that the correct machine is listed for Print Using or Use. The latest Quick Setup Guide or Network User's Guide is available in the Manuals section.Ĭlick on the Apple Menu and choose System Preferences.Ĭlick on the Print & Fax, Print & Scan or Printers & Scanners icon.Ĭlick on Default. For more information on how to setup the machine on the network, please refer to the Quick Setup Guide or Network User's Guide for your machine. Then you will need to setup your machine on the network. Plug the Brother machine to the power outlet and turn the machine power on. Connect the network cable to the Brother machine and the hub.

Connect brother printer to mac wireless